ElectriTHERM 50 Gallon Swing Tank Plus
SKU
ElectriTHERM 50 Gallon Swing Tank Plus
Swing Tank Plus
- Designed for use in Commercial Heat Pump Water Heating Systems as a Swing Tank for Single-Pass or Multi-Pass Heat Pump Systems
- THE INDUSTRY'S FINEST
- Step modulation between three inputs – Min, Mid, or Max
- At call-for-heat, the initial input is based on (supplied)outdoor temperature sensor reading(≥40°F = Min; <40°Fand ≥24°F = Mid; <24°F = Max)
- Attempts to recover tank temperature at lowest electric resistance input
- Additional input added if sensor continues to drop from setpoint
- Two configurations available
- 12.1/24/36kW
- 18/36/49.5kW
- 208, 240, or 480 VAC
- 50 and 119 gallon models
- ASME Section IV HLW - available on 119 gallon model
- Versatile Piping Options
- (5) 2" NPT connections (50 gal)
- (5) 2.5" NPT connections (119 gal)
- Optional upper side connections (extra pipe nipples supplied)
- Three thermowells for temperature monitoring (up to ø0.38" sensor)
- Two Operating Modes – Swing Tank Plus Mode or Standard Electric Water Heater Mode (for emergency backup only)
- BACnet MSTP standard
- Alarm Out (normally open, volt-free dry contact)
- Enable/Disable (with factory jumper)
- Dip switches to limit maximum input
- 182°F maximum setpoint
- AHRI Certified
- UL listed
- UL 1453 – Electric Booster and Commercial Storage Tank Water Heaters
- NSF 372 and NSF 5
- 5-year limited tank warranty
- 3" foam insulation"
Made in the USA
| SKU | ElectriTHERM 50 Gallon Swing Tank Plus |
|---|---|
| Weight | 273.000000 |
ElectricTHERM Swing Tank Plus Installation & Operation Manuals
Electric Swing Tank Plus
Submittals
Suggested Specification Sheets
