ElectriTHERM 119 Gallon Swing Tank Plus
SWING TANK PLUS - Designed for
heat pump water heating systems
and featuring step-modulation,
large inlets/outlets, BACnet,
alarm out, and enable/disable.
Note: All heaters ship 3 phase and
can be field converted to single
phase. Actual price shows after the
heater is configured.
SKU
ElectriTHERM 119 Gallon Swing Tank Plus
SKU
ElectriTHERM 119 Gallon Swing Tank Plus
Swing Tank Plus
- Designed for use in Commercial Heat Pump Water Heating Systems as a Swing Tank for Single-Pass or Multi-Pass Heat Pump Systems
- THE INDUSTRY'S FINEST
- Step modulation between three inputs – Min, Mid, or Max
- At call-for-heat, the initial input is based on (supplied)outdoor temperature sensor reading(≥40°F = Min; <40°Fand ≥24°F = Mid; <24°F = Max)
- Attempts to recover tank temperature at lowest electric resistance input
- Additional input added if sensor continues to drop from setpoint
- Two configurations available
- 12.1/24/36kW
- 18/36/49.5kW
- 208, 240, or 480 VAC
- 50 and 119 gallon models
- ASME Section IV HLW - available on 119 gallon model
- Versatile Piping Options
- (5) 2" NPT connections (50 gal)
- (5) 2.5" NPT connections (119 gal)
- Optional upper side connections (extra pipe nipples supplied)
- Three thermowells for temperature monitoring (up to ø0.38" sensor)
- Two Operating Modes – Swing Tank Plus Mode or Standard Electric Water Heater Mode (for emergency backup only)
- BACnet MSTP standard
- Alarm Out (normally open, volt-free dry contact)
- Enable/Disable (with factory jumper)
- Dip switches to limit maximum input
- 182°F maximum setpoint
- AHRI Certified
- UL listed
- UL 1453 – Electric Booster and Commercial Storage Tank Water Heaters
- NSF 372 and NSF 5
- 5-year limited tank warranty
- 3" foam insulation"
Made in the USA
| SKU | ElectriTHERM 119 Gallon Swing Tank Plus |
|---|---|
| Weight | 521.000000 |
Electric Swing Tank Plus
Submittals
Suggested Specification Sheets
